High Efficiency Vegetable Seeds Oil Mill For Oil Extraction Machine in Pakistan

1.The pretreatment process of vegetable seeds oil mill for extraction machine

The oil material pretreatment process includes the cleaning section, breaking section, flaking section, softening section and oil pressing section.

a. Create a good product environment.

b. Minimize the total fat loss, increase oil yield and output and improve the quality of oil and cake meal.

c. Comprehensively utilize impurities and offal.

d. Perfectly match extraction production line, design different .

Cleaning:remove most impurities from the material, such as stones, dirt, etc., to prepare for the next crushing process, improve crushing efficiency and extend machine life.Crushing: After the crushing process, the material is broken into small pieces, which improves the efficiency of the material being pressed.
Softening process: Increase the moisture content and temperature of the material, and ultimately increase the final oil output of the material.
Flaking process: The material is pressed into pieces in this process to increase the amount of oil discharged from the material.Oil press: The treated oil enters the squeegee from the hopper. Under the condition of high pressure, the embryo is continuously pushed inward by the screw press, and is pressed to finally produce oil.

Pretreatment result of vegetable seeds oil mill for extraction machine :

Residual oil in cake	≤5%
Handling capacity	500kg-50tons/h
Crude oil moisture and volatile matter	≤ 0.30%
Power consumption	≤ 15KWh/T
Steam consumption	≤120Kg/T (0.8MPa)
Mechnical impurities	≤ 0.3% (adjustable)
Moisture in crude oil	≤ 0.2% (qualified detonated experiment

2.The extraction process of vegetable seeds oil mill for extraction machine

(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.

(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.

(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.

(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.

Extraction→DTDC→Evaporation→Stripper→Crude oil

Extraction: The solvent enters the material and extracts the oil inside the material under a certain temperature and pressure.

DTDC: It consists of seven layers. In the first three layers, the wet mash is heated and heated by indirect steam to pre-dissolve and remove a large amount of solvent. In the next two layers, stripping is carried out under the action of direct steam, the sixth layer is dried with hot air, and the seventh layer is cooled.

Evaporation: The difference between the boiling point of the oil and the solvent is used to separate the solvent and the oil.

Stripper: The separated solvent can be dissolved in the selected paraffin or solvent and recovered.

The operating principle of vegetable seeds oil mill for extraction machine

(a) At a certain speed, the material is transported clockwise, and the solvent enters the material counterclockwise, so that the solvent and the material can be contacted to the greatest extent, and the oil yield is improved.

(b) In DTDC, in the evaporation stage, the solvent is evaporated as much as possible, and the solvent is recycled to recycle. Then in the stripping stage, the amount of solvent in the final oil is less than the local specified amount.

(c) The most important thing in the whole process is to control the temperature. Because the boiling point of the solvent and oil are different, so the temperature is controlled, then the quality of the obtained oil will be very good. Do the work of exhaust gas generated during the process of recycling and leaching to protect the environment.Oil solvent extraction result of vegetable seeds oil mill for extraction machine

Moisture of extraction material	5-8%
Temperature of extraction material	50-55°C
Oil content of extraction material	14-18%
Thickness of extraction cake	less than 13mm
Powder porosity of extraction material	less than 15% (30 mesh)
Solvent	national standard No. 6 solvent oil
Volume of supplement water	1-2m/t raw material

The Advantages

(1) High oil yield, obvious economic benefit.

(2) Residual oil rate in the dry meal is low.

(3) Improving the quality of the meal and oil.

(4) Low processing cost, high labor productivity.

(5) High automatic and labor saving.

And more other advantages please contact me now, we will provide profession program for you, and we accept custom according your requirements.

Packing & Delivery

Any special requirement of shipping, please talk with us, we will help you to solve the problems.if the amount of goods to be deliverd is relatitively small ,the goods will be packaged in the form of export wooden boxes .if the goods are shipped in the large quantities,the goods will be directly loaded into the containers and cut and reinforced to prevent the goods from colliding.

Company

Zhengzhou Qi’E Grain&Oil Machine Co.,Ltd is a large-sized joint-equity enterprise which specialize in producting edible oil mechanical equipment, corn oil making machine and it is aslo a group enterprise integrating scientific research, manufacturing,sales as one.Our oil making machine are exported to more than 30 countries,and regions such as Russia, India, South Africa, Ukraine, Nepal, Indonesia and so on.

1. More than 30 years of experience

2.Top production team

3.High quality products

Our Customers

The production and comprehensive economic indicators lie in forefront of the same industry, with products selling all over the county and exporting to over 40 countries, such as Russia, South Africa, Ukraine, Nepal, Indonesia, Kazakhstan, Korea, Vietnamese, Pakistan, Romania, and Serbia, etc.